• The surface to be sealed must be clean and dry. Surface temperature should be between 45°-85°F (7-30° C). Allow cements, stucco and mortars to cure 24 hours before applying sealer. Test on a small unobtrusive area before coating entire surface.

Application:

• Apply the sealer with a sponge, brush or sprayer. Allow to penetrate 5 to 10 minutes.
• Wipe Off excess sealers. Allow LATICRETE^® 190 Sealer to cure for 24 hours. One application is sufficient for most installations.
• NOTE: Excess material should be wiped from the surface of marble, granite, glazed tile or rock when applied on horizontal surfaces. A white residue may occur if excess material is allowed to dry on a polised surface.
• Cleaning – LATICRETE^® 190 Sealer cleans easily with fresh water immediately after use. Do not allow dried residue remain on polished surface, glass or aluminum.

Areas of Application

• Residential & commercial, ideal for soft and natural marble and porous tiles

Suitable Substrates

• Not Mentioned